It is currently November 24th, 2024, 10:04 am

Yamaha VMAX owners HELP!!!

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 17 posts ]  Go to page Previous  1, 2
Author Message
 PostPosted: September 16th, 2013, 8:38 am   
HPBC PRESIDENT
User avatar

Joined: March 30th, 2012, 2:25 pm
Posts: 2392
Location: Barrie, On
Bad_Influence wrote:
DoktorC wrote:
Is there an anti siphon valve in the fuel tank? It will be in the fitting attached to the tank.

And ditch the 25 micron merc filter and use the 10 micron yamaha filter...it was designed for the HPDI.


That 10 micron Yamaha filter is way to long to put it anywher in the AE21 L.O.L.



... you ask questions, then never listen to the guys that know why your motor sucks the cock. seriously man get a grip your motor needs good fuel filtration before the fuel gets to the motor. its just the way these yamaha's are.


Top
 Profile Send private message  
 PostPosted: September 16th, 2013, 9:39 am   
Team Member
User avatar

Joined: April 4th, 2012, 2:04 pm
Posts: 879
Location: Mississauga
Bad_Influence wrote:
DoktorC wrote:
Is there an anti siphon valve in the fuel tank? It will be in the fitting attached to the tank.

And ditch the 25 micron merc filter and use the 10 micron yamaha filter...it was designed for the HPDI.


That 10 micron Yamaha filter is way to long to put it anywher in the AE21 L.O.L.

I believe you can buy a sierra element for the merc base that is 10 micron and is shorter.

_________________
1991 Hydrostream AE-21 2002 OMC modd


Top
 Profile Send private message  
 PostPosted: September 16th, 2013, 11:11 am   
Team Member
User avatar

Joined: April 15th, 2012, 4:18 am
Posts: 158
OneCycle wrote:
Bad_Influence wrote:
DoktorC wrote:
Is there an anti siphon valve in the fuel tank? It will be in the fitting attached to the tank.

And ditch the 25 micron merc filter and use the 10 micron yamaha filter...it was designed for the HPDI.


That 10 micron Yamaha filter is way to long to put it anywher in the AE21 L.O.L.



... you ask questions, then never listen to the guys that know why your motor sucks the cock. seriously man get a grip your motor needs good fuel filtration before the fuel gets to the motor. its just the way these yamaha's are.


I have Been Listening To the Guys from this site L>M>A>O>

_________________
Ohhh!!! What a Feeling!!!....... What a Rush!!!!


Top
 Profile Send private message  
 PostPosted: October 10th, 2013, 11:22 am   
Member

Joined: February 2nd, 2013, 1:07 pm
Posts: 12
Location: Wrong Island, NY
I would try pouring seafoam directly into the water/fuel separator filter on the motor and run it through and see if it helps. It might just clean out anything gunked up thru the motor including the injectors. Then run high test always just to keep the 'ethanol' out which melts rubber parts and causes havoc.


Top
 Profile Send private message  
 PostPosted: October 10th, 2013, 2:30 pm   
Team Member
User avatar

Joined: April 4th, 2012, 2:04 pm
Posts: 879
Location: Mississauga
the only ethanol free gas available in our general area up here is Shell super. Not always available on the water.

Steve

_________________
1991 Hydrostream AE-21 2002 OMC modd


Top
 Profile Send private message  
 PostPosted: October 11th, 2013, 9:25 am   
Member

Joined: May 11th, 2013, 8:54 am
Posts: 164
so lets back track here Charlie. your yami was running great ,you changed your spark plugs sometime ago. you had a surging problem. you changed your filters . you had a leaking fuel tank. you found black contamination in your fuel system. then it was hard to start . now it runs on 3 cylinders. ( maybe not in this order ? )

1. so check to see if all cylinders have a good strong spark. if ok I would start from 0 and go through the fuel system again.
2. if 3 cylinders only have spark correct that problem.
3. otherwise at this point I would seriously consider. taking it to a experienced tech. maybe DOC and have it diagnosed correctly.
4. if you leave it over the winter and the injection system is contamined . a lot more severe damage may occur over the winter. I would fix this issue before you winterize the boat. piece of mind.

these are just my opinions. v8

_________________
stv / srv merc 2.5 280 hp
1986 seebold v8 omc
1989 panther 225 evinrude
1981 charger dl v8 sold


Top
 Profile Send private message  
 PostPosted: October 11th, 2013, 9:33 am   
Member
User avatar

Joined: August 12th, 2012, 8:37 pm
Posts: 2699
Location: lake Muskoka
v8 charged wrote:
so lets back track here Charlie. your yami was running great ,you changed your spark plugs sometime ago. you had a surging problem. you changed your filters . you had a leaking fuel tank. you found black contamination in your fuel system. then it was hard to start . now it runs on 3 cylinders. ( maybe not in this order ? )

1. so check to see if all cylinders have a good strong spark. if ok I would start from 0 and go through the fuel system again.
2. if 3 cylinders only have spark correct that problem.
3. otherwise at this point I would seriously consider. taking it to a experienced tech. maybe DOC and have it diagnosed correctly.
4. if you leave it over the winter and the injection system is contamined . a lot more severe damage may occur over the winter. I would fix this issue before you winterize the boat. piece of mind.

these are just my opinions. v8



X2 you dont want anything growing in your fuel system over the winter,,make sure everything is cleared and sea foam the snot out of it.. :lol:

_________________
Image
89 excel 91 valero,81mph sold
1988 baja x 15, chopped to 13'11" modvp Bridgeport 91mph
19' tempest picklefork 84 mod vpcarb 102mph


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 78 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010