| HPBCANADA.COM http://ww.w.hpbc.ca/ |
|
| Yamarude http://ww.w.hpbc.ca/viewtopic.php?f=19&t=1155 |
Page 1 of 1 |
| Author: | sharpeye Mike [ April 22nd, 2013, 9:48 pm ] |
| Post subject: | Yamarude |
So what year can I use in the Yamaha trim/tilt, swivel bracket conversion on a 75 hp ss Johny? I find that they are hard to come by and I would like to open up my option and how about the swivel bracket from a 65 hp Suzuki any help would be appreciated. Thanks. Mike |
|
| Author: | DoktorC [ April 23rd, 2013, 8:26 am ] |
| Post subject: | Re: Yamarude |
I think it is '86 and newer...it HAS to be the 3 ram style. I don't know about the bazuki... |
|
| Author: | sharpeye Mike [ April 24th, 2013, 7:05 pm ] |
| Post subject: | Re: Yamarude |
Thanks for the reply Doc. I'll keep looking. Mike |
|
| Author: | daveee [ April 25th, 2013, 3:33 pm ] |
| Post subject: | Re: Yamarude |
Keep in mind they are heavy and set your motor further back. Also they need a wedge to achieve negative trim, even further back. There are some interference issues to deal with at the bottom trim position. If you have a 5" setback already, you can fit a horizontal ram with-in it, no hole in the boat. (Using old style Merc trim ram) Jake did it on his Critch and it works great. #33 |
|
| Author: | sharpeye Mike [ April 26th, 2013, 8:34 am ] |
| Post subject: | Re: Yamarude |
I thought of the horizontal ram set up but I never cared for setback on my Delta, I never liked the way she handled the rough stuff with 3.5" of setback let alone 5", then again this would be for a spare motor I pick up, I'm not sure what the plans are for this motor yet but since it's apart I thought I would address this issue. Thanks for the help. Mike |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |