| HPBCANADA.COM http://ww.w.hpbc.ca/ |
|
| Challenger motor height http://ww.w.hpbc.ca/viewtopic.php?f=19&t=2261 |
Page 1 of 1 |
| Author: | Carson [ June 17th, 2014, 2:08 am ] |
| Post subject: | Challenger motor height |
Quick question on motor height on the challeners. There a 25" transom and the merc 200 ive got has the spacer on it for the 25" transom. I was reading some of the challenger brochers that are on here and it was saying its that way to reduce gear case drag. Ive got a manual jack plate with 8" of set back, will probly run a 4" spacer to get 12" of set back. So my question is should i get a shorter mid for the motor to get the prop up or just mount the long shaft engine up high? |
|
| Author: | Carson [ June 17th, 2014, 2:10 am ] |
| Post subject: | Re: Challenger motor height |
Im not trying to do 90mph with this, will be happy with 60-70mph on a nice day, just wanna get the set up close |
|
| Author: | Carson [ June 18th, 2014, 2:12 am ] |
| Post subject: | Re: Challenger motor height |
No input? Guess every ones busy gettin ready for the weekend |
|
| Author: | beavertonae-21 [ June 18th, 2014, 8:04 am ] |
| Post subject: | Re: Challenger motor height |
I'm sure James will chime in soon here, if you do not have a low water pickup/ coned lower unit, I would start with the propshaft centreline between 2" and 1.5" below the bottom edge of the hull. Steve |
|
| Author: | Carson [ June 18th, 2014, 11:07 am ] |
| Post subject: | Re: Challenger motor height |
Ive got a stock lower unit with a bobs low water pick up. Ive also got a quicksilver 24p chopper that came with my side winder, might give it a go on the challenger since the motor is at pretty much stock height on the sidewinder. |
|
| Author: | senza540 [ August 16th, 2014, 1:21 pm ] |
| Post subject: | Re: Challenger motor height |
how high with sportmaster 225 pro max with 10'' of setback |
|
| Author: | BoomerMuskoka [ August 16th, 2014, 4:05 pm ] |
| Post subject: | Re: Challenger motor height |
i would say start @ 2" bellow and work your way up |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |