| HPBCANADA.COM http://ww.w.hpbc.ca/ |
|
| Black max overheating http://ww.w.hpbc.ca/viewtopic.php?f=19&t=2909 |
Page 1 of 1 |
| Author: | sheuninck [ June 17th, 2015, 11:20 pm ] |
| Post subject: | Black max overheating |
New waterpump, no thermostats, new poppet valve, 15 lbs pressure. Still overheating. What's up with this p.o.s. Anything I should know about what causes this. Appreciate any help, our first six cyl. |
|
| Author: | dubber [ June 18th, 2015, 8:23 pm ] |
| Post subject: | Re: Black max overheating |
How is the flow coming out the tell tail? Solid like it should be? Maybe there is a blockage in the cooling jacket... |
|
| Author: | BoomerMuskoka [ June 18th, 2015, 8:49 pm ] |
| Post subject: | Re: Black max overheating |
does it have oil injection? |
|
| Author: | sheuninck [ June 19th, 2015, 8:22 am ] |
| Post subject: | Re: Black max overheating |
mixed oil and steady stream. was told fresh powerhead from Chris Carson, looks clean, runs strong. Stays cool at idle, stream gets steamy and engine loses power after being on plane for a few minutes with stock gearcase. The opposite happens using gearcase with low water pickup, overheats while idling and stays cool when on plane. |
|
| Author: | BoomerMuskoka [ June 19th, 2015, 8:34 am ] |
| Post subject: | Re: Black max overheating |
put stats back in. and use the lwp gearcase |
|
| Author: | sheuninck [ June 22nd, 2015, 8:54 am ] |
| Post subject: | Re: Black max overheating |
thanks for the tips. found issue, was not overheating, just not used to scalding hot pee tube water. block never went over 135 degrees. ran great all weekend. has fuel starvation at full throttle, had to keep pumping the bulb to keep the power on. New fuel pump in the works. |
|
| Author: | BoomerMuskoka [ June 23rd, 2015, 10:55 pm ] |
| Post subject: | Re: Black max overheating |
sheuninck wrote: thanks for the tips. found issue, was not overheating, just not used to scalding hot pee tube water. block never went over 135 degrees. ran great all weekend. has fuel starvation at full throttle, had to keep pumping the bulb to keep the power on. New fuel pump in the works. i ran an electric summit racing fuel pump on my 2.4l and it worked awesome. didnt have to pump a ball ever. |
|
| Author: | sheuninck [ June 24th, 2015, 10:55 am ] |
| Post subject: | Re: Black max overheating |
new fuel pump installed, noew motor runs great. no more power loss. keeping stock gearcase on as motor not jacked up high enough to need nosecone. thanks all |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |