HPBCANADA.COM
http://ww.w.hpbc.ca/

OLDER JACKPLATE REPLACEMENT PUMP
http://ww.w.hpbc.ca/viewtopic.php?f=19&t=3635
Page 1 of 1

Author:  Devinrude [ February 28th, 2017, 10:33 am ]
Post subject:  OLDER JACKPLATE REPLACEMENT PUMP

Hi guys I have and old cmc hydraulic jackplate it has the electric pump mounted to the outside of the jack plate and the pump is shot does anyone know we're I could find a replacement pump or retro fit a different pump on there

Author:  Rowboat [ February 28th, 2017, 11:36 am ]
Post subject:  Re: OLDER JACKPLATE REPLACEMENT PUMP

Can it be rebuilt or is it destroyed?

Author:  Tomcat [ February 28th, 2017, 2:12 pm ]
Post subject:  Re: OLDER JACKPLATE REPLACEMENT PUMP

Last time I checked CMC weren't very forthcoming with parts, they just want to sell new assemblies for Big $$.
Could be that an outside hydraulics supplier can help.

Author:  hec2buck [ February 28th, 2017, 5:19 pm ]
Post subject:  Re: OLDER JACKPLATE REPLACEMENT PUMP

Try contacting Bob's Machine Shop in Florida. They sell a motor/pump assembly that is used on their Jack Plates. It is a hydraulic pump and the pressure is adjustable on both the in and out travel on the cylinder. In you case, up and down.

Author:  sharpeye Mike [ February 28th, 2017, 7:34 pm ]
Post subject:  Re: OLDER JACKPLATE REPLACEMENT PUMP

I replaced the motor on mine last summer. I took it to where they repair alternators and starters, he couldn't fix it so he ordered one from one of the companies he deals with. Pricey though, $325 tax incl. and that's with no pump.

Author:  Carson [ March 1st, 2017, 2:20 pm ]
Post subject:  Re: OLDER JACKPLATE REPLACEMENT PUMP

There the same pump as the older external mount omc pumps i believe. Atleast thats what my buddys was. Just need to find one off an old omc and ur set if thats the case

Author:  beavertonae-21 [ March 1st, 2017, 3:54 pm ]
Post subject:  Re: OLDER JACKPLATE REPLACEMENT PUMP

The Bobs pump is the same as a Merc trim pump and the merc trim hosed work also. I have the same setup on my AE. You also end up with a plate that cycles up and down allot faster . Make sure the rest of your plate is in good shape, some of them elongated around the slots on the side.

Author:  Devinrude [ March 2nd, 2017, 11:43 pm ]
Post subject:  Re: OLDER JACKPLATE REPLACEMENT PUMP

Sorry for the late response but I got it rebuilt at my local electric motor shop for 90 bucks and mine did have 2 messed up slide holes in just die grinder it a little bit now the slides work good should I be concerned about that

Author:  beavertonae-21 [ March 2nd, 2017, 11:55 pm ]
Post subject:  Re: OLDER JACKPLATE REPLACEMENT PUMP

if the plate has play in it yes , post a pic if you can

Page 1 of 1 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com