mitchie wrote:
I gotta admit... I like them. But all V-bottoms are Allison copies.
Says the guy with the GT20...
| HPBCANADA.COM http://ww.w.hpbc.ca/ |
|
| Vampire Sport Boats http://ww.w.hpbc.ca/viewtopic.php?f=2&t=1117 |
Page 1 of 1 |
| Author: | SHIVERS [ April 8th, 2013, 2:02 pm ] |
| Post subject: | Vampire Sport Boats |
http://vampiresportboats.webs.com/ Are these a copy of another hull, or something different? The website video doesn't make them look too stable! |
|
| Author: | Hounddog [ April 8th, 2013, 2:12 pm ] |
| Post subject: | Re: Vampire Sport Boats |
I believe their based on an Allison. They don't look stable because they run them in VP75 class which is a 49 OMC LONG SHAFT, BIG FOOT class where the prop shaft must be 5 inches below the bottom of the boat. |
|
| Author: | DoktorC [ April 8th, 2013, 3:31 pm ] |
| Post subject: | Re: Vampire Sport Boats |
I thought they were a copy of the Hydrostream vampire...or did I dream that?? |
|
| Author: | Hounddog [ April 8th, 2013, 3:57 pm ] |
| Post subject: | Re: Vampire Sport Boats |
From their site: About Vampire Boats From the late 60's to early 70's, Vampire boats were built in Minooka, Illinois by Jack Lewis. During this time, boat racing legend Ron Baker was working with Jack to develop some of hulls to perform better under racing conditions. This led to the creation of the 15' Banshee. The molds were sold and relocated to St. Paul, MN and built by Mic Halbrehder under the name Pacecraft from the mid to late 70's. Currently, the 15' Banshee has been re-created, modified and redesigned under the direction of Ron Baker's son Jeff Baker in Wyoming, MN. An original Vampire boat was used as a plug with several modifications to manufacture new deck and hull molds. This boat is currently being produced as either a enclosed cockpit race model (Comp) and an open cockpit version (Sport). Each boat is custom built to order based on driver size and dimension. The Vampire boat is a highly competitive race boat that can be used in several classes of boat racing. In September, 2011, Aaron Wachholz drove the Vampire Comp (#69) to win the OPC National Championship in VP-75. |
|
| Author: | Supermitchie [ April 8th, 2013, 4:08 pm ] |
| Post subject: | Re: Vampire Sport Boats |
I gotta admit... I like them. But all V-bottoms are Allison copies. |
|
| Author: | DoktorC [ April 8th, 2013, 4:11 pm ] |
| Post subject: | Re: Vampire Sport Boats |
mitchie wrote: I gotta admit... I like them. But all V-bottoms are Allison copies. Says the guy with the GT20...
|
|
| Author: | Supermitchie [ April 8th, 2013, 4:52 pm ] |
| Post subject: | Re: Vampire Sport Boats |
One of the if not the fastest single engine GT20's on the planet. With a full interior. 
|
|
| Author: | SHIVERS [ April 8th, 2013, 5:34 pm ] |
| Post subject: | Re: Vampire Sport Boats |
Hounddog wrote: I believe their based on an Allison. They don't look stable because they run them in VP75 class which is a 49 OMC LONG SHAFT, BIG FOOT class where the prop shaft must be 5 inches below the bottom of the boat. that makes sense now why they look like my T boat running! I'm not as quick around the course,but I have a blast trying to be fast and keep my ass in the seat! |
|
| Author: | wildcatt [ April 8th, 2013, 8:27 pm ] |
| Post subject: | Re: Vampire Sport Boats |
mitchie wrote: I gotta admit... I like them. But all V-bottoms are Allison copies. apparently! this is true 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |