who can i take my 2.4l block to get a nikasil sleeve cut out and a sleeve put back in. ? and the rest honed . .. i think that is my best option,, that,, or 3 steel in the bridgeport block,
| HPBCANADA.COM http://ww.w.hpbc.ca/ |
|
| re sleeve http://ww.w.hpbc.ca/viewtopic.php?f=2&t=1669 |
Page 1 of 6 |
| Author: | BoomerMuskoka [ September 24th, 2013, 2:12 pm ] |
| Post subject: | re sleeve |
who can i take my 2.4l block to get a nikasil sleeve cut out and a sleeve put back in. ? and the rest honed . .. i think that is my best option,, that,, or 3 steel in the bridgeport block,
|
|
| Author: | TopGun [ September 24th, 2013, 3:46 pm ] |
| Post subject: | Re: re sleeve |
cv tech in quebec 1800 518 7220 |
|
| Author: | BoomerMuskoka [ September 24th, 2013, 5:34 pm ] |
| Post subject: | Re: re sleeve |
TopGun wrote: cv tech in quebec 1800 518 7220 iv sent cylinders to them before for nikasil, i didnt know they did steel. isnt there anyone closer that can put an advanced sleeve or something in it for me. 
|
|
| Author: | Northbase [ September 24th, 2013, 8:58 pm ] |
| Post subject: | Re: re sleeve |
BoomerMuskoka wrote: Isn't there anyone closer that can put an advanced sleeve or something in it for me. Sure.... Would you get a proctologist to do your heart surgery?? |
|
| Author: | v8 charged [ September 24th, 2013, 9:43 pm ] |
| Post subject: | Re: re sleeve |
I do all that work in my own shop at home..  
|
|
| Author: | BoomerMuskoka [ September 24th, 2013, 11:04 pm ] |
| Post subject: | Re: re sleeve |
Northbase wrote: BoomerMuskoka wrote: Isn't there anyone closer that can put an advanced sleeve or something in it for me. Sure.... Would you get a proctologist to do your heart surgery?? its not going to be a race engine, its just a motor i want to build and run untill it pops, if i cant blow it up in a year or so ill practically give it to a friend for next to nothing for a turd boat of some sort.
|
|
| Author: | BoomerMuskoka [ September 24th, 2013, 11:12 pm ] |
| Post subject: | Re: re sleeve |
v8 charged wrote: I do all that work in my own shop at home.. is that why your slomc blew up when it did 92 mph........once.
|
|
| Author: | v8 charged [ September 25th, 2013, 8:14 am ] |
| Post subject: | Re: re sleeve |
| lol nope I just stated that I do that work at home in house. good luck I have 6 brand new dave bush racing sleeves that we are installing in my slomc . in house.  and I have full access to my friends machine shop 15min from my house so I never have to send any thing out. boring honing, milling. ect.ect.ect. like paul said . send it to Bernard at cv tech |
|
| Author: | beavertonae-21 [ September 25th, 2013, 8:36 am ] |
| Post subject: | Re: re sleeve |
Hey that was my slomc! that is a great motor, even when it fried a pistom, it got Mark home. I took alot of " what is that washing machine doing on the back of your boat" from our neighbour when I had the panther, until he raced me...... alot of these omc's go 1000 plus hours before needing to be rebuilt boomer, there are some guys down south routinely running them down to 70's compression numbers and they are still turning 6500 plus rpm. I know I sound like a omc commercial, but these are , in my opinion, the best bang for the buck out there, you can usually buy them really cheap, and they run forever. A little compression, and porting and look out. I not so sure about the compression any more though with todays goat piss marina gas. My fav marina gas omc would be Toms ho (250hp) 3 litre fingerport looper on regular gas.Ok back to team Yamaha Steve |
|
| Author: | BoomerMuskoka [ September 25th, 2013, 9:10 am ] |
| Post subject: | Re: re sleeve |
beavertonae-21 wrote: Hey that was my slomc! that is a great motor, even when it fried a pistom, it got Mark home. I took alot of " what is that washing machine doing on the back of your boat" from our neighbour when I had the panther, until he raced me...... alot of these omc's go 1000 plus hours before needing to be rebuilt boomer, there are some guys down south routinely running them down to 70's compression numbers and they are still turning 6500 plus rpm. I know I sound like a omc commercial, but these are , in my opinion, the best bang for the buck out there, you can usually buy them really cheap, and they run forever. A little compression, and porting and look out. I not so sure about the compression any more though with todays goat piss marina gas. My fav marina gas omc would be Toms ho (250hp) 3 litre fingerport looper on regular gas.Ok back to team Yamaha Steve i just like hearing v8 talk 15 mi up the road to a buddys house isnt " in house" .. .. i would and did run an omc for years and it never let me down. after i rebuilt it, when i was 12. it lasted me untill last summer then sold it and is still ticking i hear..i know of cv tech and i also know there is probably 100 machine shopes between here and there that can drop ONE steel sleeve into a cylinder,, its not a huge job. if i was getting 6 no question i'd send it to Quebec. thanks ill get er done. |
|
| Page 1 of 6 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |