It is currently November 24th, 2024, 5:37 am

360 APX ...F1 V8....MERCURY RACING OUTBOARD

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 6 posts ] 
Author Message
 PostPosted: September 30th, 2020, 9:19 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3166
WOW!

https://www.mercuryracing.com/outboards/engines/360apx/

The Mercury Racing 360 APX is a potent competition outboard designed specifically to power Formula 1 tunnel boats in the premier class of the UIM F1H2O World Championship. The 360 APX is tuned to deliver amazing torque from a durable, low-emissions four-stroke V8 powerhead that sets a new benchmark for circuit-racing performance.

A 4.6-liter V8 powerhead is naturally aspirated and features deep-breathing dual overhead cam/four-valve architecture with a short-runner intake manifold mated to a cold-air induction system. An 11:1 compression ratio boosts torque output while the 7000 RPM redline extends the power curve. A dynamic oil pickup system is designed to maintain critical engine oil pressure under high-G loads. A cut-down flywheel, deleted balance shaft and carbon fiber top cowl optimize weight.


Top
 Profile Send private message  
 PostPosted: September 30th, 2020, 12:32 pm   
Team Member

Joined: April 3rd, 2012, 10:03 am
Posts: 813
Location: Gravenhurst, Ontario
I don’t get it......
Why a 4.6 litre V-8......
Yamaha’s R-1 bike engine has been around for years.
Very similar motor now used in sleds...
4 cylinder 1000cc
Depending on the level of tune and the use of a turbo or blower....400 reliable horsepower easy.
I’m not being critical of Mercs new creation I just can’t figure out why it takes that much displacement & 8 holes.....


Top
 Profile Send private message  
 PostPosted: September 30th, 2020, 2:15 pm   
Member

Joined: August 22nd, 2013, 4:13 pm
Posts: 273
I promise you that there is much more power there, by upping boost and tweaking cam & ECU. With the 10% rule from BIA, it probably puts out closer to 400hp now. How much more power can a F-1 boat handle?


Top
 Profile Send private message  
 PostPosted: September 30th, 2020, 2:37 pm   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
hec2buck wrote:
I promise you that there is much more power there, by upping boost and tweaking cam & ECU. With the 10% rule from BIA, it probably puts out closer to 400hp now. How much more power can a F-1 boat handle?


There's no boost on this one. N/A 4.6L....I just love the idea of shorter midst being a thing again.

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
 PostPosted: September 30th, 2020, 4:05 pm   
Member

Joined: August 22nd, 2013, 4:13 pm
Posts: 273
Thanks. Apparently, no super charger on that model.


Top
 Profile Send private message  
 PostPosted: October 1st, 2020, 8:04 am   
Team Member
User avatar

Joined: October 2nd, 2012, 7:53 am
Posts: 947
Location: Peterborough
Northbase wrote:
I don’t get it......
Why a 4.6 litre V-8......
Yamaha’s R-1 bike engine has been around for years.
Very similar motor now used in sleds...
4 cylinder 1000cc
Depending on the level of tune and the use of a turbo or blower....400 reliable horsepower easy.
I’m not being critical of Mercs new creation I just can’t figure out why it takes that much displacement & 8 holes.....

I think it's longevity. I think the Yami 1000 is a great motor too, but it's mostly used on platforms that weigh the same as it does. To produce the kind of torque it would need for marine use wouldn't be as easy as adding cylinders. Yamaha had a four stroke 1000 cc outboard, not sure if it was the same platform, but I think it topped out at 115 HP? Now that motor is a 1.8l. I'm sure Doc will correct me if I'm wrong on that lol....

_________________
1988 Canadian Edition Vision sold
1990 Hydrostream Virage Stage 3 Turbo


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010