i started into the hull today didn't do much but i ground a few cracks down the're not into the glass, i have alott of grinding sanding and filling ,, gonna be sweet..
i some safety gear to test out..
| HPBCANADA.COM http://ww.w.hpbc.ca/ |
|
| 87 mod vp glass repair. http://ww.w.hpbc.ca/viewtopic.php?f=20&t=1109 |
Page 1 of 1 |
| Author: | BoomerMuskoka [ April 5th, 2013, 11:19 pm ] |
| Post subject: | 87 mod vp glass repair. |
i started into the hull today didn't do much but i ground a few cracks down the're not into the glass, i have alott of grinding sanding and filling ,, gonna be sweet.. i some safety gear to test out..
|
|
| Author: | BoomerMuskoka [ May 2nd, 2013, 2:57 pm ] |
| Post subject: | Re: 87 mod vp glass repair. |
     
|
|
| Author: | p man [ May 2nd, 2013, 4:39 pm ] |
| Post subject: | Re: 87 mod vp glass repair. |
I've always had good luck with grinding out gel cracks with a flapper wheel like this. They are way easier to control then a thick grinding stone. Finish with a 60 and 120 orbital sander and fill with 3m marine premium filler (vinyl ester) Cheap and CT carries it. 220 that then work your way up to a 400 with a high build type primer and you shouldnt see the repairs. http://www.canadiantire.ca/AST/browse/6 ... ?locale=en Looking good though |
|
| Author: | BoomerMuskoka [ May 2nd, 2013, 8:29 pm ] |
| Post subject: | Re: 87 mod vp glass repair. |
thanks pat, im not sure what i will be using yet,, still grinding, then im gonna do some grinding and then some more grinding, then i have to build a transom, and possibly do some more grinding  ,, that slopy mess of fiber glass was a peice of transom the guy i bought it off stuck in,, wasn't hard, luckily the guy didnt know how to add hardener to resin  would of been a b^%$h to get out,, plus some more rot i had to cut out..,, i hate when people half cut out a transom and start trying to molest half a transom back in,,, i put a good dent in it today still have several hours on the grinder,, i had it smoking today, 
|
|
| Author: | LittleCharger [ May 2nd, 2013, 9:08 pm ] |
| Post subject: | Re: 87 mod vp glass repair. |
I think what Pat is suggesting is to use a flap disc on the grinder and put the stone grinder wheel away, the flap disc does a nicer job and gives a better contour and is easier to control. They do remove material well. http://www.bing.com/images/search?q=Fla ... tedIndex=2 Cheers, |
|
| Author: | BoomerMuskoka [ May 3rd, 2013, 7:29 am ] |
| Post subject: | Re: 87 mod vp glass repair. |
LittleCharger wrote: I think what Pat is suggesting is to use a flap disc on the grinder and put the stone grinder wheel away, the flap disc does a nicer job and gives a better contour and is easier to control. They do remove material well. http://www.bing.com/images/search?q=Fla ... tedIndex=2 Cheers, i think pat is agreeing with me using a flap disk,, note pic 1. flap disk on a grinder... im not sure what ill use for fill and primer,i might try duratek primer  if i can do a big area with it... i have a buddy thats going to order everything thru his business for me.
|
|
| Author: | p man [ May 3rd, 2013, 9:10 am ] |
| Post subject: | Re: 87 mod vp glass repair. |
It looked to me like you had a rigid wheel on your grinder. |
|
| Author: | BoomerMuskoka [ May 3rd, 2013, 2:28 pm ] |
| Post subject: | Re: 87 mod vp glass repair. |
ic, nope flapper 40 and 80 ....., 80 100 on the orbital, im going to have to do the core on this pig aswell ffs..found a hole and its rotten
|
|
| Author: | BoomerMuskoka [ May 7th, 2013, 11:40 am ] |
| Post subject: | Re: 87 mod vp glass repair. |
   few ponies. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |