you built that motor before i was born
,, do you know George from The Engine Works in Gravenhurst? that sounds like something he might be interested in.
| HPBCANADA.COM http://ww.w.hpbc.ca/ |
|
| CHEVY 400 CUBIC INCH SMALL BLOCK CAST IRON MOTOR http://ww.w.hpbc.ca/viewtopic.php?f=25&t=2030 |
Page 1 of 2 |
| Author: | Hounddog [ March 13th, 2014, 2:40 pm ] |
| Post subject: | CHEVY 400 CUBIC INCH SMALL BLOCK CAST IRON MOTOR |
I bet there are not many of these around to-day. In 1967 to 1969 Chevy made a special motor for their Camaro, a 302 cubic inch Trans Am engine under rated at 295 horsepower. Good for a race car but not so good as a street racer. Not enough torque. In 1970 it became the LT1 350 cubic inch motor 370 hp [still under rated] that was much better. We street racers knew there was a better option. Chevy also made a small block 400 cubic inch motor. You could dress it up to look the same as a 302 and you could put the solid lifter cam in it so it would sound the same as a 302. Unlike the 302, this motor had lots of torque for street racing and was quicker. The last one I built was in 1984 and I still have it. NEVER FIRED. 400 cubic inch small block chev Forged aluminum pistons 302 aluminum intake Solid lifter cam New holley [1984] carb 327/ 375 hp fuelie heads. I can get the motor out in the spring. If you’re interested let me know. Once you see it, we can talk price. I may just part it out. |
|
| Author: | BoomerMuskoka [ March 13th, 2014, 3:26 pm ] |
| Post subject: | Re: CHEVY 400 CUBIC INCH SMALL BLOCK CAST IRON MOTOR |
you built that motor before i was born ,, do you know George from The Engine Works in Gravenhurst? that sounds like something he might be interested in.
|
|
| Author: | Hounddog [ March 13th, 2014, 3:50 pm ] |
| Post subject: | Re: CHEVY 400 CUBIC INCH SMALL BLOCK CAST IRON MOTOR |
BoomerMuskoka wrote: you built that motor before i was born ,, do you know George from The Engine Works in Gravenhurst? that sounds like something he might be interested in.I know of him, but have never spoke to him. As for my age...IT IS NOT THE YEARS...ITS THE MILEAGE! I still consider myself young. My last girlfriend was 29 and I dumped her. |
|
| Author: | Northbase [ March 13th, 2014, 4:01 pm ] |
| Post subject: | Re: CHEVY 400 CUBIC INCH SMALL BLOCK CAST IRON MOTOR |
Hounddog wrote: BoomerMuskoka wrote: you built that motor before i was born ,, do you know George from The Engine Works in Gravenhurst? that sounds like something he might be interested in.I know of him, but have never spoke to him. As for my age...IT IS NOT THE YEARS...ITS THE MILEAGE! I still consider myself young. My last girlfriend was 29 and I dumped her. LMFAO!! You're only as old as the woman you feel!!
|
|
| Author: | p man [ March 13th, 2014, 4:09 pm ] |
| Post subject: | Re: CHEVY 400 CUBIC INCH SMALL BLOCK CAST IRON MOTOR |
Hounddog wrote: My last girlfriend was 29 and I dumped her. FOR THE LOVE OF GOD PLEASE TELL ME THAT HAPPENED 40 YEARS AGO 
|
|
| Author: | Hounddog [ March 13th, 2014, 4:29 pm ] |
| Post subject: | Re: CHEVY 400 CUBIC INCH SMALL BLOCK CAST IRON MOTOR |
p man wrote: Hounddog wrote: My last girlfriend was 29 and I dumped her. FOR THE LOVE OF GOD PLEASE TELL ME THAT HAPPENED 40 YEARS AGO I am happly married. My wife is happy..I'm married! We're getting off topic here. That's fine with me. Remember the best mates to have are half your age plus seven years. I have many remarried friends and common law relationship friends.. Oddly eventhough it is TRUE. I have male friends with much younger women and I have female freinds with much younger men. In every case it is about money, security and being allowed freedom in the relationship. This math obviously does not work when your young. But if your in the 50 plus age, it does work. |
|
| Author: | 1 I Bandit [ March 13th, 2014, 5:29 pm ] |
| Post subject: | Re: CHEVY 400 CUBIC INCH SMALL BLOCK CAST IRON MOTOR |
Hi Hounddog I would be intrested in this we used to take the crank out of the 400's and put them in bored out 350's change the pistons to 327 pistons so the skirts didn't hit the throws on the crank and you had a 383 stroker. Do you have double bump heads on it? Do you know the compression? Cam specs? I am about to get started on rebuilding my car I have had sitting for to long I do have a 383 stroker for it but it is nice to have some options or a spare in case something blows up. |
|
| Author: | 1 I Bandit [ March 13th, 2014, 5:35 pm ] |
| Post subject: | Re: CHEVY 400 CUBIC INCH SMALL BLOCK CAST IRON MOTOR |
BoomerMuskoka wrote: you built that motor before i was born ,, do you know George from The Engine Works in Gravenhurst? that sounds like something he might be interested in.Hey Boomer I built motors before you born too.
|
|
| Author: | wetsidedown [ March 13th, 2014, 9:59 pm ] |
| Post subject: | Re: CHEVY 400 CUBIC INCH SMALL BLOCK CAST IRON MOTOR |
Many of us were doing things before Boomer was born, O GOD, WHOS KID IS HE???????? |
|
| Author: | DoktorC [ March 13th, 2014, 10:24 pm ] |
| Post subject: | Re: CHEVY 400 CUBIC INCH SMALL BLOCK CAST IRON MOTOR |
wetsidedown wrote: Many of us were doing things before Boomer was born, O GOD, WHOS KID IS HE???????? Hahahahanahahaha... |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |