| HPBCANADA.COM http://ww.w.hpbc.ca/ |
|
| MINT!!! Quicksilver 24" Laser II $150 http://ww.w.hpbc.ca/viewtopic.php?f=29&t=1960 |
Page 1 of 1 |
| Author: | Chargerwilly [ January 27th, 2014, 11:58 pm ] |
| Post subject: | MINT!!! Quicksilver 24" Laser II $150 |
Laser II 13.5 x 24" mint condition. 15 spline. 48 16994 A40 24P. 9/10 with a quick buff it would be a 10/10. This is a smaller 4" barrel for XR4 and inline engines according to this site; http://www.rundquist.com/pb_application.htm I wish I would have found this before I purchased. I'm disappointed it doesn't fit because it's beautiful. Just got it today and it's gotta go. $150 Or trade for 13.75"+ diameter 22"+ pitch OMC or Merc. Prop is for '89 Johnson 150 V6 Let me know what you have.           
|
|
| Author: | Chargerwilly [ January 28th, 2014, 1:34 pm ] |
| Post subject: | Re: MINT!!! Quicksilver 24" Laser II $150 |
Chargerwilly wrote: Laser II 13.5 x 24" mint condition. 15 spline. 48 16994 A40 24P.
9/10 with a quick buff it would be a 10/10. This is a smaller 4" barrel for XR4 and inline engines according to this site; http://www.rundquist.com/pb_application.htm I wish I would have found this before I purchased. I'm disappointed it doesn't fit because it's beautiful. Just got it today and it's gotta go. $150 Or trade for 13.75"+ diameter 22"+ pitch OMC or Merc. Prop is for '89 Johnson 150 V6 Let me know what you have. |
|
| Author: | wildcatt [ January 28th, 2014, 3:26 pm ] |
| Post subject: | Re: MINT!!! Quicksilver 24" Laser II $150 |
Just a thought ... I ran a small hub laser II 20P on my Yamaha V6. Just used a trim ring. Worked fine Also - I've run a 4 blade trophy on my V6 Johnson. It had a small hub and worked well. you might want to try it - before you sell it? |
|
| Author: | Chargerwilly [ January 28th, 2014, 11:25 pm ] |
| Post subject: | Re: MINT!!! Quicksilver 24" Laser II $150 |
I would love to run this prop if I could. Where's the best place to grab a trim ring? I'm in the process of collecting several props to run on the boat. 18 DL 150 Jonny. I need something to ski with, cruise with and haul ass with. I don't mind changing props. I currently have; 14.25 x ??? Aluminum 14.25 x 21 Aluminum 13.5 x 24 SS Laser II 14 x 25 SST OMC 14.25 x 26 Precision Turbo All 3 blades The aluminums came with the engine. I'm looking for a 23" prop as well. I've got a line on a very sweet Laser II 13.75 x 23 large hub. I also have a line on a sweet 23" Ballistic. A friend of mine has a 28" big ear chopper to try too. A friend of mine has a Charger SK 18 with a 150 XR6 and uses a 23" to ski and wakeboard with and a 25" when he wants to go faster. So, here I sit amongst a growing pile o props. I should stop buying props and get some carpet for the float. And a couple lawn chairs! |
|
| Author: | WalkWithMax [ January 29th, 2014, 10:03 am ] |
| Post subject: | Re: MINT!!! Quicksilver 24" Laser II $150 |
You might find this to be your best prop! I had a 17ft Panther with a 200 merc. We ran a small hub 26 laser II. It was great for everything! I got my blow out ring from John at Kawartha Prop. (705) 657-8752 |
|
| Author: | wildcatt [ January 30th, 2014, 9:14 am ] |
| Post subject: | Re: MINT!!! Quicksilver 24" Laser II $150 |
WalkWithMax wrote: You might find this to be your best prop! I had a 17ft Panther with a 200 merc. We ran a small hub 26 laser II. It was great for everything! I got my blow out ring from John at Kawartha Prop. (705) 657-8752 I got my ring from John as well. Forget the aluminum! too much flex and will be crappy in the corners. Good for a spare. I'd try a 19 or 20 SS for skiing, and the 24 you have already might be good for top end. Make sure your tach is working and use a GPS speedo when testing for top end. If you don't test and record your findings accurately - you'll be chasing your tail and wasting money buying props. |
|
| Author: | Flat Out [ June 7th, 2017, 8:53 pm ] |
| Post subject: | Re: MINT!!! Quicksilver 24" Laser II $150 |
Probably a long shot, do you still have the 26 laser Sean 647-393-7326 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |