T BOAT STUFF YOU WANT TO SELL..RIGGING, PROPS, EQUIPMENT etc

Andrew4ce · **Posted:** July 27th, 2012, 8:08 am

Hounddog wrote:

$800.00..TILLER model 1991 Yamaha Pro 50 bottom unit with auto tilt
http://ontario.kijiji.ca/c-cars-vehicle ... Z399667777

Looking at those pics... my tiller shift linkage is not home made like I thought it was. Maybe my motor just needs adjustment or something to get reverse working but it's beyond what I could figure out. With the lower unit off I can shift it into reverse easy. If anyone could have a look at Dunnville that would be great. Or if there is some instructions on how to adjust it.

DoktorC · **Posted:** July 27th, 2012, 9:04 am

Andrew4ce wrote:

Hounddog wrote:

$800.00..TILLER model 1991 Yamaha Pro 50 bottom unit with auto tilt
http://ontario.kijiji.ca/c-cars-vehicle ... Z399667777

Looking at those pics... my tiller shift linkage is not home made like I thought it was. Maybe my motor just needs adjustment or something to get reverse working but it's beyond what I could figure out. With the lower unit off I can shift it into reverse easy. If anyone could have a look at Dunnville that would be great. Or if there is some instructions on how to adjust it.

Ya the tiller linkages are really wonky in those years...I'll try to get the info you need Andrew..

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3167

Nitro Gearcase for Johnson or Evinrude 3 Cylinder Short Shaft Stinger.

No bids..bet if you contact seller he will ship to Canada.

http://www.ebay.com/itm/Nitro-Gearcase- ... _91wt_1170

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3167

SST-60 Boat & Trailer + VP 75 Parts

OWNER: Jim Jost
PHONE: 262-388-2889
EMAIL: rsehockey@wi.rr.com
LOCATION: n/a
PRICE: $1000.00

2000 Yeehaw 60SST boat with trailer and tool box. Located in Milwaukee, Wisconsin. Could be delivered to Kankakee race Labor Day. Other extras available for VP-75 class 49.9 Full Dressed Powerhead & two cleaver props.

VP-75 uses a long shaft motor. Props and power head maybe of interest.

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3167

Not a 1975 because this is the large gear case. Likely 1973.
Mid will work with a nitro and a 56 provided you change the motor base plate. It is not the one you want even for a 49. This one would have the long tuner.

http://ontario.kijiji.ca/c-cars-vehicle ... Z403971617

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3167

If there is a T750 racer out there who wants to race a Yamaha. I will sell you everything you need to build a short shaft motor. It will include a good crank and no junk.. You will just need to rebuild it.
Cost would be $750.00.
ONLY FOR A RACER!!

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3167

I guess the word is officially out about using a Pro 50 trim on an OMC 15 inch stinger.

http://www.ebay.com/itm/YAMAHA-PRO-50-P ... ar&vxp=mtr

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3167

Broken set back with power trim $80.00

I bet a smart T boat guy can make something out of this.

http://ontario.kijiji.ca/c-cars-vehicle ... Z414991190

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3167

70 Yamaha CES motors and parts

http://translate.google.ca/translate?hl ... 4Q7gEwBzhQ

There are a few things very interesting in the picture.
[1] no water pick up on the gear cases. They must use a transom water pick up.
[2] all the carbs are 90 hp not 70 hp
[3] look at the size of the tuners [right edge] they are twice the size of the stock 70ces.

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3167

New T850 boat seat for rookies.

http://ontario.kijiji.ca/c-cars-vehicle ... Z423093257

HPBCANADA.COM

T BOAT STUFF YOU WANT TO SELL..RIGGING, PROPS, EQUIPMENT etc

Who is online