Upper trailer for a Two up T boat trailer

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3168

What about 2 trailers side by side? You would need to have the boats angled on their trailers like they do with the large inboard hydros.
Interesting idea.

http://www.youtube.com/watch?v=rHIK5303Gtg

http://ontario.kijiji.ca/c-cars-vehicle ... Z385605473

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3168

Hounddog wrote:

What about 2 trailers side by side? You would need to have the boats angled on their trailers like they do with the large inboard hydros.
Interesting idea.

http://www.youtube.com/watch?v=rHIK5303Gtg

http://ontario.kijiji.ca/c-cars-vehicle ... Z385605473

These fellows are not too far from Kitchener. I e-mailed them for information. I will keep you posted.

tunnelv · **Posted:** November 21st, 2012, 9:59 am

i saw this side by side in kijiji, wondered like you said tip the boat a bit, if both leaned the same way maybe one gunnel would fit under the other? or get a wide load permit :lol:

also mount the bunks a bit higher on one boat to help the other fit under,they would need adjustable bunks these look welded,

Himagain · **Joined:** April 14th, 2012, 5:59 pm **Posts:** 564

that is the solution right there. the only problem is the beam. I have a different issue getting 2 T boats and the STV to the race site. I am thinking about a large enclosed. with all the boats on dolly's

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3168

The max width is 102 inches. They are very interested in making one. Each side trailer would be 14 feet to the break in the trailer. I will see what they come back with.

OneCycle · **Posted:** November 21st, 2012, 11:09 am

Himagain wrote:

that is the solution right there. the only problem is the beam. I have a different issue getting 2 T boats and the STV to the race site. I am thinking about a large enclosed. with all the boats on dolly's

or they could be on super small pwc trailers for launching and they would still fit in the trailer... rolling shop... i like the enclosed trailer idea!

sheuninck · **Posted:** November 21st, 2012, 2:12 pm

http://www.hydrostreamforums.com/viewtopic.php?f=6&t=35

SlowBoater · **Joined:** April 2nd, 2012, 8:56 pm **Posts:** 73

Hounddog wrote:

What about 2 trailers side by side? You would need to have the boats angled on their trailers like they do with the large inboard hydros.
Interesting idea.

http://www.youtube.com/watch?v=rHIK5303Gtg

http://ontario.kijiji.ca/c-cars-vehicle ... Z385605473

These fellows are not too far from Kitchener. I e-mailed them for information. I will keep you posted.

That's cool. My office is in New Hamburg. About 5 min away from there I'm out there once a week if I can help.

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3168

Up-Date on the 2 across trailers:
Brant, is the fellow that makes them. We have had a few conversations. He is interested. They would be custom made. The cost would be approximately $2500.00. He is working on plans to build them and wants to me with us at the Toronto Boat Show. Last Day. There will be a T Boat on display at the show, so we will be able to do some measurements and discuss ideas. Those that are interested should plan to attend.

Hydroid Junior · **Posted:** November 29th, 2012, 9:01 pm

I found a few pics on the Hydrostream archives of double decker trailers. Looks like there used to be a number of them.
http://www.hydrostream.org/PhotoArchives/2.jpg
http://www.hydrostream.org/PhotoArchives/15.jpg
http://www.hydrostream.org/PhotoArchives/16.jpg
http://www.hydrostream.org/PhotoArchives/7.jpg

Pretty cool trailers.

HPBCANADA.COM

Upper trailer for a Two up T boat trailer

Who is online