HPBCANADA.COM

Looks cool, bet it sounds better. Still running the R8, can't imagine getting something I'd enjoy more. Picking up a charger STV with a 300x on it in a month or so. It's getting cleaned up first.

Took a break from the boats and rolled the mustang out of the garage to blow the dust off. Hoping to finish off the prep for paint then paint it and get back to work on it. Will be a nice mid 10 street/ strip car when complete. Got most of the parts now. Hey yammer whats the engine combo your running if your entitled to say? Lol

I am running a 408" SBF 700ish at 7100rpm all motor. Now I've switched things up a bit and have added a I.S. nitrous plate capable of pushing 600hp of nitrous although I'll be pushing a consistent 250-350 shot only. Should run an easy 8.60 give or take.

What's your motor and drivetrain plans

Ill be running a sbf 331, short filled block, afr 205 heads. Were aiming for 500 at the wheels, engine will be turning around 8700 rpm. In the process of building a face plated t-5, should be interesting the first few times out. Just need all my rear suspension stuff and rim/ tires and i should have everything to finish the car.

What's the power adder for your 500 rwhp ? What rear suspension you planning ? T5 down the strip huh .... what's your E.T goals ?
Sounds like a great build man.

Thinking on going with something like the team z street beast with heim joints and an anti roll bar. Plan on a 27-10.5 tire. As for the motor were aiming to make that power all motor, no power adder

What ET are you looking to shoot for. ?
Heads , cam spec , intake and carb ?
That's a stout motor
Mini tub or no ?

Im aiming for mid 10's, if anything i wanna beat the kid with the 460hp skyline in barrie haha.
Heads will be afr 205's with some porting.
Cam will be a custom grind once the final flow numbers are in on the heads.
Intake will be an edelbrock super victor
Carb mostlikely will be an a.e.d 950
Gonna try and squeez a 27-10.50 in the stock wheel tubs with some trimming of the fender lip.
Already have my fuel system in, stock tank with a sump welded in the rear, holley pro 150 billet fuel pump. Should be a fun ride when done.

Gonna be a big big cam for 700+ crankshaft HP.
Mid 10's consistently are a little tougher manwell style but can be done for sure.
I run 28-10.5" MT no problem on my non mini rubbed car.

What size of rim 7"?