It is currently November 28th, 2024, 3:08 am

what speed does a boat get on the pad.

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 9 posts ] 
Author Message
 PostPosted: September 17th, 2015, 8:28 pm   
Member
User avatar

Joined: September 15th, 2015, 2:35 pm
Posts: 392
Location: Slough, England UK
might sound like silly question.
but at roughly what speed would a 17ft v hull with pad actually get on the pad ?
I know each hull is going to be different, but a rough idea would be good.

the boat is deep v with a pad, engine is a 1977 johnson 140 crossflow with a 13 3/4x23 srx prop.

cant post pic as it keeps saying Sorry, the board attachment quota has been reached????


Top
 Profile Send private message  
 PostPosted: September 17th, 2015, 8:36 pm   
Team Member
User avatar

Joined: April 4th, 2012, 2:04 pm
Posts: 879
Location: Mississauga
more information needed. What make/ model is the hull?

_________________
1991 Hydrostream AE-21 2002 OMC modd


Top
 Profile Send private message  
 PostPosted: September 17th, 2015, 8:39 pm   
Member

Joined: May 21st, 2013, 8:29 pm
Posts: 124
Location: Barrie
What boat? Prob 60-65 but unfortunately you likely wont see that speed with your setup unless she be real light n that crossflow can scream real high.

You gotta use a site like photobucket to host pics but I've not tried it either so I just never post pics..

_________________
87 Vegas/00 Promax
04 Ally/2.5


Top
 Profile Send private message  
 PostPosted: September 18th, 2015, 7:15 pm   
Member
User avatar

Joined: September 15th, 2015, 2:35 pm
Posts: 392
Location: Slough, England UK
the boat is a picton 170 gts.
deep v with a pad.
I think the rpms of the engine is about 6,000 rpm with a 13 3/4x 23 pitch srx.
ratio is 2 to1 so probably mid 50's for top speed.
these hull were used a lot for ski racing, and this particular boat was used for ski racing with
a johnson 85hp v4 originally..

these pics might give an idea of the hull, the pad is about 8ft long and 8 inch wide.
the suzi 30 on it was just for a cruise down the harbour while waiting for bigger engine.


Image


Image
.


Top
 Profile Send private message  
 PostPosted: September 18th, 2015, 8:38 pm   
Team Member
User avatar

Joined: April 4th, 2012, 2:04 pm
Posts: 879
Location: Mississauga
Nice boat!

_________________
1991 Hydrostream AE-21 2002 OMC modd


Top
 Profile Send private message  
 PostPosted: September 18th, 2015, 9:12 pm   
Team Member
User avatar

Joined: October 2nd, 2012, 7:53 am
Posts: 947
Location: Peterborough
Pretty cool hull! I'd expect it to lift around 60-65, but with 140hp you're tapped out. Big mods to the V4, or step up to a V6, that baby should move

_________________
1988 Canadian Edition Vision sold
1990 Hydrostream Virage Stage 3 Turbo


Top
 Profile Send private message  
 PostPosted: September 18th, 2015, 9:21 pm   
Member
User avatar

Joined: August 12th, 2012, 8:37 pm
Posts: 2699
Location: lake Muskoka
looks kinda like a sidewinder clone of sorts :) v6 it up :lol:

_________________
Image
89 excel 91 valero,81mph sold
1988 baja x 15, chopped to 13'11" modvp Bridgeport 91mph
19' tempest picklefork 84 mod vpcarb 102mph


Top
 Profile Send private message  
 PostPosted: September 19th, 2015, 7:04 am   
Member
User avatar

Joined: September 15th, 2015, 2:35 pm
Posts: 392
Location: Slough, England UK
This boat used to be mine, but now belongs to a friend who is taking it apart and doing a restoration.
stringers transom floor etc.
It is nothing at all like a sidewinder, ive had the dateline bikini and that is identical to sidewinders.
sidewinder and dateline are exactly the same boats, both companies say they done it first.
this is a picton, better built boat than a dateline/sidewinder as it can do stuff in the proper rough.
The picton was designed for offshore racing and ski racing, the race boats were just same
hulls without the extra comfort bits.
these ride very high on the water.

if you look at this http://ocrda.info/history/
then the photo gallery it gives an idea of what these boats were to race in.

but if she needs to get to 60mph to be on pad then that might not happen.


Top
 Profile Send private message  
 PostPosted: September 19th, 2015, 9:02 am   
Member
User avatar

Joined: August 12th, 2012, 8:37 pm
Posts: 2699
Location: lake Muskoka
sounds like it could be a fun hull.. Dok would like that photo gallery it appears they are running v4 motors on these hulls.

_________________
Image
89 excel 91 valero,81mph sold
1988 baja x 15, chopped to 13'11" modvp Bridgeport 91mph
19' tempest picklefork 84 mod vpcarb 102mph


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010