HPBCANADA.COM

well the time as come. since I baught the talon a couple of weeks ago this boat has to moove. its pretty well known around here but i'll list the specific anyways.

1998 charger STV. baught in 2011. I re-did EVERYTHING on it.
new core, strigners, floor, all in marine grade ply, carpet, paint, livorsi gauges plastic 16gal gas tank, manual jack plate, battery and tray, sound system, all this in 2012.

after that came hydraulic steering in 2013 when I switched to merc power.

re did all the interior with new front bucket and rear seat in 2014. repowered the boat with a 225 promax that year also. when from a CLE lower to a coned CLE this year also. its all wrapped in a bridgeport hood that was painted with all new stickers installed.

also in 2014, I repainted the bottom with interlux brightside paint. it holds up well but some has flaked away on the running surfaces. you cant see it unless you look under the boat.

Dave scott rebuilt the powerhead in spring of 2015 with new wsm pistons and rings, new steel cage bearings, new boyeseen reeds and shaved heads. the oil injection is removed and the rev limiter is stock at 6800rpm.
later that year, the skeg was repaired on the lower after a hit by kawarta as well as propellers and while it was there, they re-fitted the cone and re-profiled all of it witch in the end, made it faster. they aso repaired and modified my 30 pitch chopper prop witich comes with the boat.

included also is a full canva tarp and 2 gallons of amsoil hp oil.

boat sits on a nice trailer with new bunks and wheel wells installed in 2012.

boat is still in storage and I should be able to get it out in a couple of weeks or so. i'll fire it up and take compression number and leak down as well. compression should be in the mid to high 130's.

I will consider splitting the package but the hull HAS to sell first.

the boat runs high 80's to low 90's with just me in it. best top speed was achieved this year with a 92.5mph

heres some pics..I have a million of them so dont hesitate to ask if you want to see something specific.

ohh and the price is set at 12 500$ for all of it

wow that boat looks awesome.

thanks! i've put alot on time in effort in it for shure!

This is the nicest example of this hull I have seen. Runs great too with the promax.

I have not seen this boat in person but thought it always looked nice in the photos. I do like these hulls very much. How fast was it with the yamaha? Good luck with the sale!

Thanks! I ran a best of 83.5mph with the yamaha. Bone stock with the 6200rpm limiter,a cone and no torque tab. There was more left but I switched to merc the season after that

the boat is out of storage. still need to fire it up but i'm waiting for warmer temps.

I took a bunch more pics so heres the photobucket link.
http://s1060.photobucket.com/user/mista ... t=3&page=1

bump for a great turn key package. great first boat!