HPBCANADA.COM

I have a ton of OMC 75 parts I need to part with
3 heads,
2 cab sets,
2 cowlings
2pans
1 starter
front crank case
2 water jackets exhaust covers
6 reed blocks with stock reeds
electrical parts,
wiring harness
gaskets
1 fuel pump
motor mounts
3 air boxes
boxes of bolts and hardware
pistons 9 with rods some are scored
lower pan with wing plate cut outs
solenoids



I am asking $650 for the lot. I would rather sell all together to keep it simple


I will be doing an inventory this week and take a few photos as well
Mike

DO you have a smooth side cowl?

Yes I do have one without the raised lettering if that's what your looking for I could send you a photo if you want



ote="voo-doo_child"]DO you have a smooth side cowl?[/quote]

looking to get rid of all my boating equipment
need this gone
also have complete sst 90
sst90 motor
spare ph
parts
and props see my other add
thanks

[quote="visa 88"]Yes I do have one without the raised lettering if that's what your looking for I could send you a photo if you want


Not quite, i am looking for one that smooth all the way from bottom to top, no step down for the last 3 inches of the top, hard to explain...

I am also interested in the lower pan with cut outs, potentially the fuel pump, wiring harness, starter and gaskets.

Do you have a set of controls?

I have a pile of 49 stuff as well
Cranks to electronics
Let me know what you need

Did you find the hood you were looking for? I think you're talking about the early Johnson hoods before they started using the same stepped style as the Evinrude ones. I have a few here if you need.

Kevin

No I haven't found one, this is exactly what i am looking for.