It is currently November 24th, 2024, 7:25 am

Proposed rule changes / updates and tech form

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 44 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
Author Message
 PostPosted: November 5th, 2012, 8:25 pm   
Team Member

Joined: August 20th, 2012, 11:27 am
Posts: 1028
Location: Brooklin
Tomcat wrote:
Not that this needs clarification but ....
My Xr01, 2 seat lake (fun) boat that doesn't have a 300 Drag "must" compete in Outlaw.
I seriously doubt I'd be competitive with a 245 carb motor ... Can I get a number that says field filler?


This is why the proposed rules have been posted before they're made official. You have a good point and your situation will be considered and we can see what the general opinion is. I have no problem in making it a "hull designed for two passenger minimum" instead of the three person. What is your XR2001 though ? Is it a River Racer , Drag or the rare MVP ?
There's always room to make it work the very best we can for everyone's situation within reason.
Also a 2.5 carb can run like a raped ape

_________________
2015 TORC Lake Racer Champion & ODBA Lake Racer 3rd Place World Championship
2014 TORC & ODBA Lake Racer World Champion !!!
2017 OSCA True Street champion / ET record holder 8.55 / MPH record holder 168.8mph
2017 OGW Nitrous Shootout Champion
2016 OSCA True Street champion
2015 OSCA 8.90 2nd in Championship

..... just a little SBF at 8.39


Top
 Profile Send private message  
 PostPosted: November 5th, 2012, 8:37 pm   
Team Member
User avatar

Joined: July 13th, 2012, 6:57 pm
Posts: 521
Location: Little Britain, ON
Thanks for the consideration.
No rare beast here ... a 92 Xr2001 River Racer with a steel sleeve 200 block, 20" mid, CLE.
I'm told the motor was built well and makes 245, no way to verify, haven't run it yet.
2013's going to be FUN.


Top
 Profile Send private message  
 PostPosted: November 5th, 2012, 8:42 pm   
Team Member

Joined: August 20th, 2012, 11:27 am
Posts: 1028
Location: Brooklin
Tomcat wrote:
Thanks for the consideration.
No rare beast here ... a 92 Xr2001 River Racer with a steel sleeve 200 block, 20" mid, CLE.
I'm told the motor was built well and makes 245, no way to verify, haven't run it yet.
2013's going to be FUN.


We can see what the consensus is. I don't see a reall issue there though. There's no need to eliminate a racer that wants to race that's for sure. The different in a hull designed for 3 vs 2 is really not worth the debate as the weight difference isn't very much if at all and when we are allowing all interior to be remove or reconfigured to allow only a single seat you do have a point for sure. We can see what people post about your point

_________________
2015 TORC Lake Racer Champion & ODBA Lake Racer 3rd Place World Championship
2014 TORC & ODBA Lake Racer World Champion !!!
2017 OSCA True Street champion / ET record holder 8.55 / MPH record holder 168.8mph
2017 OGW Nitrous Shootout Champion
2016 OSCA True Street champion
2015 OSCA 8.90 2nd in Championship

..... just a little SBF at 8.39


Top
 Profile Send private message  
 PostPosted: November 5th, 2012, 8:46 pm   
Team Member
User avatar

Joined: July 13th, 2012, 6:57 pm
Posts: 521
Location: Little Britain, ON
Thanks, it might be worth pointing out that the guy in the seat will be a Newb and no real threat to anyone.
I plan on getting a lot of seat time before putting myself or others at risk.


Top
 Profile Send private message  
 PostPosted: November 5th, 2012, 8:59 pm   
Team Member
User avatar

Joined: July 13th, 2012, 6:57 pm
Posts: 521
Location: Little Britain, ON
It just occurred to me that technically an XR01 "2 seater" in Lake Racer with a Drag 300 is essentially an Outlaw boat as it's stated now.
You might have to amend the rules to limit HP on 2 seat boats to be legal in Lake Racer.
I can refer to many examples in various motorcycle racing classes where such amendments exist
IE: 2 cyl vs 3 cyl vs 4 cyl all competing in the same class based on HP limitations
Just a thought.


Top
 Profile Send private message  
 PostPosted: November 5th, 2012, 9:11 pm   
Team Member

Joined: August 20th, 2012, 11:27 am
Posts: 1028
Location: Brooklin
If its a 15" mid and a RR then you'd be fine in Lake Racer if the consensus is to allow 2 seat design hulls into Lake Racer. Drag motors are allowed in Lake Racer as it is now just limited compression. Now if you had an XR2001 Drag then I'd have to put my vote against you and you'd end up in TORC Outlaw.
I wouldn't worry about it if I were you. TORC Drag Racing will do what we can.

And for driving tips it's actually a great spot to be for VEE bottom drivers as most of the best of the best in this area will be there.

_________________
2015 TORC Lake Racer Champion & ODBA Lake Racer 3rd Place World Championship
2014 TORC & ODBA Lake Racer World Champion !!!
2017 OSCA True Street champion / ET record holder 8.55 / MPH record holder 168.8mph
2017 OGW Nitrous Shootout Champion
2016 OSCA True Street champion
2015 OSCA 8.90 2nd in Championship

..... just a little SBF at 8.39


Top
 Profile Send private message  
 PostPosted: November 5th, 2012, 9:19 pm   
Team Member
User avatar

Joined: July 13th, 2012, 6:57 pm
Posts: 521
Location: Little Britain, ON
Cool, I'm looking forward to lots of seat time, testing and valued advice from fellow Vee drivers.


Top
 Profile Send private message  
 PostPosted: November 5th, 2012, 9:31 pm   
Team Member

Joined: April 3rd, 2012, 10:03 am
Posts: 813
Location: Gravenhurst, Ontario
Jeff Yammer wrote:
Tomcat wrote:
Thanks for the consideration.
No rare beast here ... a 92 Xr2001 River Racer with a steel sleeve 200 block, 20" mid, CLE.
I'm told the motor was built well and makes 245, no way to verify, haven't run it yet.
2013's going to be FUN.


We can see what the consensus is. I don't see a reall issue there though. There's no need to eliminate a racer that wants to race that's for sure. The different in a hull designed for 3 vs 2 is really not worth the debate as the weight difference isn't very much if at all and when we are allowing all interior to be remove or reconfigured to allow only a single seat you do have a point for sure. We can see what people post about your point


Based on the H.P., it's a no brainer. He should be running in lake racer, not outlaw. Having said that, if engine upgrades push the H.P. upto levels found in outlaw....congrats Tomcat...you get promoted!
Either way, we'll be runnin each other!
:mrgreen:


Top
 Profile Send private message  
 PostPosted: November 5th, 2012, 9:36 pm   
Team Member
User avatar

Joined: July 13th, 2012, 6:57 pm
Posts: 521
Location: Little Britain, ON
Engine upgrades are precluded by driver upgrades .... Nothing like learning from the best.


Top
 Profile Send private message  
 PostPosted: November 6th, 2012, 9:35 am   
TORC VP

Joined: April 14th, 2012, 5:59 pm
Posts: 564
The rules are a guide line. We will always reserve the right to Class boats where we feel they best fit, to keep racing competitive. That said as we move forward the only way to make everything equal is to run like ODBA and have weight classes and minimums based on the class, boat and motor combo. We are a season or two away from this. After all the main goal here if fun and to attract racers.


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 44 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010