T BOAT STUFF YOU WANT TO SELL..RIGGING, PROPS, EQUIPMENT etc

jake@elsey.ca · **Posted:** November 5th, 2012, 8:32 pm

The number cast on the inside of the flywheel is "580810"
I believe the updated/proper part number is "0580956"
It comes off of the 1972 65 horse stinger for certain. (65 ESL 72 S)

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3167

For you guys wanting PRO 50 power trim.
2 powertrims
lots of parts YAMAHA PRO 50
$350.00

http://ontario.kijiji.ca/c-cars-vehicle ... Z429350548

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3167

15 inch nitro gearcase
You need to phone the seller. Make arrangements to have it shipped to a US address.
I know of at least 2 T guys wanting one.
This one looks in good shape.

http://www.ebay.com/itm/Clean-Used-John ... _266wt_892

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3167

This motor is still for sale. There are 3 T750 guys looking for a gearcase. Make the guy an offer.

http://ontario.kijiji.ca/c-cars-vehicle ... Z405758330

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3167

jake@elsey.ca wrote:

The number cast on the inside of the flywheel is "580810"
I believe the updated/proper part number is "0580956"
It comes off of the 1972 65 horse stinger for certain. (65 ESL 72 S)

Jake is this one?

http://www.ebay.com/itm/1972-evinrude-6 ... 1138wt_892

Hevi Kevi · **Posted:** November 16th, 2012, 2:18 am

I don't know for sure which motor the one I have was off of originally as the motor it came on is a mix of 70 and 75 49.9ci stuff but it has that casting number and weights 9.5lbs... Maybe they used the same casting and machined some out for the 65 stinger???

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3167

I don't know why so many T guys think this flywheel will make any difference. If? we were doing a LeMans start and its a World Championship maybe. It is only a bit lighter. Your not allowed to run the CC Mod 50 flywheel which is half the weight.
Anyway here is another picture of one on a powerhead.

http://www.ebay.com/itm/1973-Johnson-Ev ... 827wt_1129

fibertron · **Joined:** March 31st, 2012, 11:33 pm **Posts:** 60

For the guys looking for steering bars I'm going to be making several sets over the winter... I make them for the 49, 56, and sst60 motors as well as the 2 cyl motor for t750 and the Yamaha 70. Just let me know what you need.. Lots of guys in the class are already using them. They cost 180 dollars a set if if ordered before jan 1st. and can be anodized red, blue, or black depending on what I'm having done...

fibertron · **Joined:** March 31st, 2012, 11:33 pm **Posts:** 60

cylinder head cutting available 70 dollars for the omc head cc'd to any size you want. Pm for details.

WalkWithMax · **Posted:** November 18th, 2012, 9:46 am

fibertron wrote:

For the guys looking for steering bars I'm going to be making several sets over the winter... I make them for the 49, 56, and sst60 motors as well as the 2 cyl motor for t750 and the Yamaha 70. Just let me know what you need.. Lots of guys in the class are already using them. They cost 180 dollars a set if if ordered before jan 1st. and can be anodized red, blue, or black depending on what I'm having done...

I've already got a set on order from you Bryan. If you make them plain aluminum thats fine, but anodized red would be awesome!!!
Dave.

HPBCANADA.COM

T BOAT STUFF YOU WANT TO SELL..RIGGING, PROPS, EQUIPMENT etc

Who is online